Development of a catalytic cracking process for converting waste plastics to petrochemicals

The catalytic degradation of polyolefin using H-gallosilicates was examined using a bench-scale reactor (0.8kg/h) with semicontinuous feeding and the following plastics: (1) low-density polyethylene (LDPE) pellets; (2) linear low-density polyethylene (L-LDPE) pellets; (3) high-density polyethylene (HDPE) pellets; (4) polypropylene (PP) pellets; (5) polyolefin obtained from pulverized industrial waste plastics. The yields of liquid compounds from these materials, which were aromatics in most cases, ranged from 55wt% to 68wt%. With an increase in the ratio of total reactant to catalyst, the liquid yield remained the same. Yields of benzene, toluene, and xylenes (BTXs) decreased rapidly to below 50wt% at a ratio of more than 30. Differences in this ratio for BTXs were always small and were independent of the material. Only about half of the gas product was propane with a fresh catalyst. When the experiments were repeated, propylene, isobutane, and isobutene were found to increase.     

中日合作项目职业安全卫生法规与标准体系初步研究

按照中日合作项目《加强中国安全生产科学技术能力计划》,分析了中国职业安全卫生法规标准体系现状,提出了中国《安全生产法》和日本《劳动安全卫生法》的各自特点与不同点。同时,系统梳理了中国危险化学品、机械安全和职业卫生等领域安全生产法规标准体系,分析了其中存在的主要问题,提出了针对性对策和建议。这对健全中国职业安全卫生法规体系建设具有重要的借鉴和参考意义。     

Identification of chemical substances in industrial wastes and their pyrolytic decomposition products

In order to quantify the sources of chemical pollutants in the leachate from reclaimed wastes, chemical substances in 11 different types of industrial wastes were identified. Their elution behaviors were also investigated. Alkanes (5.3-890 ng g(-1)), benzenes (8.1-110 ng g(-1)), polyaromatic hydrocarbons (PAHs) (3.2-560 ng g(-1)), alcohols, steroids, phenol (7.1 ng g(-1)), ketones, furans (190-210 ng g(-1)), phthalates (8.9-560 ng g(-1)), benzoquinones, dibenzothiophene (190 ng g(-1)), benthiocarb (4.2 ng g(-1)), sulfur, nitrile compounds, amino compounds, amido compounds, pyridines, quinolines (1.8-15 ng g(-1)), isoquinolines, carbazoles, acridines, chlordenes (1.5-1.6 ng g(-1)) and nonachlors (1.1-1.6 ng g(-1)) were detected in 9 types of industrial wastes. The chemical substances detected in waste at the highest concentrations were alkanes, PAHs and phthalates. Water supply sludge, dust and brick garbage contained many kinds of chemical substances. The elution behaviors of specific chemical substances, COD and nutrients varied by characteristic and production process of each waste. Over 100 different compounds were detected in pyrolysis products including carbohydrate, carotynoid, amino acids, proteins, humic acids, lignin and combustion products.     

Identification of sources of lead in the atmosphere by chemical speciation using X-ray absorption near-edge structure (XANES) spectroscopy

Sources of Pb pollution in the local atmosphere together with Pb species, major ions, and heavy metal concentrations in a size-fractionated aerosol sample from Higashi-Hiroshima(Japan) have been determined by X-ray absorption near-edge structure(XANES) spectroscopy, ion chromatography, and ICP-MS/AES, respectively. About 80% of total Pb was concentrated in fine aerosol particles. Lead species in the coarse aerosol particles were PbC2O4, 2PbCO3·Pb(OH)2, and Pb(NO3)2, whereas Pb species in the fine aerosol particles were PbC2O4, PbSO4, and Pb(NO3)2. Chemical speciation and abundance data suggested that the source of Pb in the fine aerosol particles was different from that of the coarse ones. The dominant sources of Pb in the fine aerosol particles were judged to be fly ash from a municipal solid waste incinerator and heavy oil combustion. For the coarse aerosol particles, road dust was considered to be the main Pb source. In addition to Pb species, elemental concentrations in the aerosols were also determined. The results suggested that Pb species in size-fractionated aerosols can be used to identify the origin of aerosol particles in the atmosphere as an alternative to Pb isotope ratio measurement.     

Catalytic activities of zeolite compounds for decomposing aqueous ozone

The advanced oxidation process (AOP), chemical oxidation using aqueous ozone in the presence of appropriate catalysts to generate highly reactive oxygen species, offers an attractive option for removing poorly biodegradable pollutants. Using the commercial zeolite powders with various Si/Al ratios and crystal structures, their catalytic activities for decomposing aqueous ozone were evaluated by continuously flowing ozone to water containing the zeolite powders. The hydrophilic zeolites (low Si/Al ratio) with alkali cations in the crystal structures were found to possess high catalytic activity for decomposing aqueous ozone. The hydrophobic zeolite compounds (high Si/Al ratio) were found to absorb ozone very well, but to have no catalytic activity for decomposing aqueous ozone. Their catalytic activities were also evaluated by using the fixed bed column method. When alkali cations were removed by acid rinsing or substituted by alkali-earth cations, the catalytic activities was significantly deteriorated. These results suggest that the metal cations on the crystal surface of the hydrophilic zeolite would play a key role for catalytic activity for decomposing aqueous ozone.     

Contribution of transboundary air pollution to ionic concentrations in fog in the Kinki Region of Japan

To estimate the contribution of transboundary transported air pollutants from other Asian countries to Japan in ionic concentrations in fog water in March 2005, the Community Multiscale Air Quality (CMAQ) modeling system was utilized with meteorological fields produced by the 5th generation Mesoscale Model (MM5). For meteorological predictions, the model well reproduced the surface meteorological variables, particularly temperature and humidity, and generally captured fog occurrence. For chemical predictions, most of the model-predicted monthly mean concentrations were approximately within a factor of 2 of the observations, indicating that the model well simulated the long-range atmospheric transport from the Asian Continent to Japan. For SO₄^2?, NO₃^? and NH₄⁺, the contribution rates of the transboundary air pollution in the Kinki Region of Japan ranged from 69 to 82% for aerosols, from 47 to 87% for ionic concentrations in rain, and from 55 to 79% for ionic concentrations in fog. The study found that the transboundary air pollution also affected ionic concentrations in fog as well as aerosol concentrations and ionic concentrations in rain.     

Abiotic reduction of antimony(V) by green rust (Fe(4)(II)Fe(2)(III)(OH)(12)SO(4).3H(2)O)

Green rust (Fe(4)(II)Fe(2)(III)(OH)(12)SO(4).3H(2)O) is an intermediate phase in the formation of iron (oxyhydr)oxides such as goethite, lepidocrocite, and magnetite. It is widely considered that green rust occurs in many soil and sediment systems. Green rust has been shown to reduce sorbed Se(VI), Cr(VI), and U(VI). In addition, it is also reported that green rust does not reduce As(V) to As(III). In this study, we have investigated for the first time the interaction between Sb(V) and green rust using XAFS and HPLC-ICP-MS. Most of the added Sb(V) was adsorbed on green rust, and Sb(III), a reduced form, was observed in both solid and liquid phases. Thus, it was shown that green rust has high affinity for Sb(V), and that Sb(V) was reduced to more toxic Sb(III) by green rust despite the high stability of the Sb(V) species even under reducing condition as reported in previous studies. Therefore, green rust can be one of the most important reducing agents for Sb(V), which can influence the Sb mobility in suboxic environments where green rust is formed.     

Modeling the influence of biogenic volatile organic compound emissions on ozone concentration during summer season in the Kinki region of Japan

Tropospheric ozone adversely affects human health and vegetation, and biogenic volatile organic compound (BVOC) emission has potential to influence ozone concentration in summer season. In this research, the standard emissions of isoprene and monoterpene from the vegetation of the Kinki region of Japan, estimated from growth chamber experiments, were converted into hourly emissions for July 2002 using the temperature and light intensity data obtained from results of MM5 meteorological model. To investigate the effect of BVOC emissions on ozone production, two ozone simulations for one-month period of July 2002 were carried out. In one simulation, hourly BVOC emissions were included (BIO), while in the other one, BVOC emissions were not considered (NOBIO). The quantitative analyses of the ozone results clearly indicate that the use of spatio-temporally varying BVOC emission improves the prediction of ozone concentration. The hourly differences of monthly-averaged ozone concentrations between BIO and NOBIO had the maximum value of 6 ppb at 1400 JST. The explicit difference appeared in urban area, though the place where the maximum difference occurred changed with time. Overall, BVOC emissions from the forest vegetation strongly affected the ozone generation in the urban area.     

中日合作项目国内外危险化学品安全管理初步研究

按照中日合作项目《加强中国安全生产科学技术能力计划》,分析了日本、美国、加拿大、德国、欧盟和联合国等国际危险化学品安全管理现状,总结提出了实施风险评价、申报登记、风险控制、信息警示和员工培训等国际危险化学品安全管理方式及其特点。同时,结合中国危险化学品安全管理现状,提出了系统化建设危险化学品安全生产法规标准体系、制定作业场所危险化学品卫生要求、修订《危险化学品安全管理条例》等进一步建立健全中国危险化学品安全管理的对策和建议。这对完善中国危险化学品安全管理具有重要的参考意义。     

Removal of lead from aqueous solutions by condensed tannin gel adsorbent

Lead has caused serious environmental pollution due to its toxicity, accumulation in food chains and persistence in nature.In this paper, lead removal from aqueous solutions was investigated using condensed tannin gel adsorbent synthesized from a natural tannin compound. It is found that the adsorption is strongly affected by pH values of aqueous solutions.Within pH range of 3.5-6,when initial lead concentration is 100 mg/L, removal efficiency is more than 90%.Adsorption equilibrium is reached within 150 minutes.The adsorption isotherm fits well with the Langmuir equation, by which the saturated adsorption uptake of 190 mg Pb^2 /g dry tannin gel adsorbent is obtained.By means of thermodynamics analysis,it is revealed that the process is exothermic and the adsorption heat is up to 38.4kJ/mol.With respect to high efficiency, moderate pH requirement and minimized second pollution, the tannin gel adsorbent exhibits a promising potential in the removal of lead from wastewater.